* PSPICE bicmosis.lib file RWN 06/21/93
* These are the MOSIS run parameters for run
* N21H SPICE LEVEL 2 PARAMETERS recorded 04/28/93
.MODEL nfet NMOS LEVEL=2 LD=0.250000U TOX=418.000008E-10
+ NSUB=9.236187E+14 VTO=0.858153 KP=5.048000E-05 GAMMA=0.198
+ PHI=0.6 UO=596.729 UEXP=7.029586E-02 UCRIT=10266.7
+ DELTA=2.7371 VMAX=65701.4 XJ=0.250000U LAMBDA=1.843384E-02
+ NFS=1.086360E+12 NEFF=1 NSS=1.000000E+10 TPG=1.000000
+ RSH=28.760000 CGDO=3.097916E-10 CGSO=3.097916E-10 CGBO=3.838441E-10
+ CJ=8.997900E-05 MJ=0.783638 CJSW=5.524800E-10 MJSW=0.285064 PB=0.800000
* Weff = Wdrawn - Delta_W
* The suggested Delta_W is -0.24 um
.MODEL pfet PMOS LEVEL=2 LD=0.250000U TOX=418.000008E-10
+ NSUB=9.309300E+15 VTO=-0.889271 KP=1.908000E-05 GAMMA=0.6289
+ PHI=0.6 UO=216.28 UEXP=0.218144 UCRIT=62664
+ DELTA=0.164572 VMAX=100000 XJ=0.250000U LAMBDA=5.011626E-02
+ NFS=9.266623E+11 NEFF=1.001 NSS=1.000000E+10 TPG=-1.000000
+ RSH=66.820000 CGDO=3.097916E-10 CGSO=3.097916E-10 CGBO=3.727276E-10
+ CJ=2.981300E-04 MJ=0.556944 CJSW=3.002100E-10 MJSW=0.243045 PB=0.800000
* Weff = Wdrawn - Delta_W
* The suggested Delta_W is -0.17 um
* SPICE2 file created from asor.ext - technology: scmos
m0 10 11 12 13 pfet w=9u l=2u
+ ad=45p pd=28u as=108p ps=42u
m1 10 11 14 Gnd nfet w=3u l=2u
+ ad=19p pd=18u as=47p ps=42u
m2 15 16 12 13 pfet w=9u l=2u
+ ad=18p pd=22u as=0p ps=0u
m3 11 17 15 13 pfet w=9u l=2u
+ ad=45p pd=28u as=0p ps=0u
m4 11 16 14 Gnd nfet w=3u l=2u
+ ad=22p pd=20u as=0p ps=0u
m5 14 17 11 Gnd nfet w=3u l=2u
+ ad=0p pd=0u as=0p ps=0u
** a_8_3# == 15
** a_10_n20# == 17
C0 17 GND 4.8fF
** a_2_n20# == 16
C1 16 GND 5.7fF
** a_n3_n13# == 14
C2 14 GND 5.2fF
** asinv_0/out == 10
C3 10 GND 3.7fF
** Vdd == 12
C4 12 GND 5.6fF
** a_n7_n4# == 11
C5 11 GND 10.7fF
** w_n17_1# == 13
** Gnd == 18
**skip bp
.tran 1ms 10ms SKIPBP
**supply voltages
v0 13 0 DC 5
v1 Gnd 0 DC 0
v2 12 0 DC 5
v3 14 0 DC 0
**set input,stimuls
v4 16 0 DC 5
**.DC v4 0 5 0.1
v5 17 0 DC 0
**.DC v5 0 5 0.1
**Enable Probe
.PROBE
.END